Shijiazhuang Zhengdrilling Machinery Equipment Co., Ltd.
Service Email: bruce@well-drillrigs.com
Bruce:+86-18603299555
EN
ES
FR
RU
Selecting a suitable drilling machine is an important step for contractors working on deep water wells, industrial water supply projects, groundwater development, and geothermal drilling. The equipment must match the planned borehole depth, drilling diameter, geological conditions, and available supporting systems.
The ZD600 water well drilling rig from ZDrill Machinery is a crawler-mounted, full-hydraulic drilling machine designed for water well construction and other drilling applications. With a manufacturer-listed drilling depth of approximately 600–700 meters, depending on the published specification, it can be considered for projects that require more capacity than conventional shallow-well equipment.
As a water well drilling rig supplier in China, ZDrill provides drilling equipment and configuration options for international buyers. This guide introduces the ZD600's published specifications, key selection factors, and questions to consider before requesting a quotation.
For complete product information, visit the official ZD600 Water Well Drilling Rig product page.
Before choosing a 600m water well drilling rig, buyers should review the technical parameters against their actual project requirements. The following table summarizes specifications published on the ZDrill product page.
| Technical Parameter | Manufacturer-Published Specification |
|---|---|
| Model | ZD600 |
| Maximum drilling depth | Listed as 600–700 m |
| Drilling diameter | 105–500 mm |
| Working air pressure | 1.05–4.5 MPa |
| Air consumption | 16–60 m³/min |
| Drill pipe length | 3 m, 4.5 m, 6 m |
| Drill pipe diameter | 102 mm / 114 mm |
| Axial pressure | 15 T |
| Lifting force | 45 T |
| Maximum rotary torque | 11,000–14,000 N·m |
| Rotary speed | 75–150 r/min |
| Travel speed | 3.5 km/h |
| Climbing capacity | 21° |
| Machine weight | 12.5 T |
| Overall dimensions | 5.8 × 2.25 × 2.75 m |
| Optional equipment | Mud pump, air compressor, pipe reamer, welding generator |
| Listed drilling methods | Hydraulic rotary drilling, DTH hammer drilling, mud drilling |
These figures are manufacturer-published specifications. Buyers should confirm the final configuration, applicable depth rating, drilling method, and accessory requirements directly with the supplier before ordering. Actual drilling results depend on geological formations, borehole diameter, operating conditions, and the complete equipment setup.
The ZD600 uses a full-hydraulic drilling system. Its published product information describes adjustable rotational speed, torque, axial pressure, and feed-related parameters to accommodate different drilling conditions.
For drilling contractors, this flexibility can be useful when planning work across changing formations. The appropriate operating settings should be determined according to the drilling method, formation characteristics, and manufacturer's operating guidance.
A crawler chassis can help move the drilling rig around suitable construction sites without relying entirely on road transport equipment for every short relocation.
This configuration may be worth considering for rural groundwater projects, industrial sites, and locations where the working surface or access route makes a conventional truck-mounted machine less convenient.
However, buyers should evaluate the actual ground-bearing conditions, slope, transport dimensions, and site access before selecting a crawler rig.
The manufacturer's product information lists hydraulic rotary drilling, down-the-hole (DTH) hammer drilling, and mud drilling among the available methods.
The correct approach depends on the formation and borehole design:
DTH drilling: Often considered for suitable hard-rock formations when an appropriately matched hammer and air supply are available.
Mud drilling: May be appropriate for selected unconsolidated formations or borehole designs requiring drilling fluid for cuttings removal and borehole support.
Rotary drilling: The appropriate tooling and operating arrangement depend on the formation, drilling program, and machine configuration.
Not every method or accessory is necessarily included in the standard machine package. Confirm the intended drilling method and required components when discussing the order.
The ZD600 product page identifies several application areas for this class of equipment.
Rural communities and contractors may need boreholes to access groundwater for domestic water supply. The rig should be selected according to the target depth, water demand, geological survey, and local well-construction requirements.
Industrial projects may require groundwater sources to support production or other site operations. Buyers should define the expected water demand, borehole diameter, depth, and water-quality requirements before selecting drilling equipment.
Groundwater can be an important irrigation source in areas where surface water is limited or seasonal. For irrigation projects, contractors should assess the planned well depth, soil and rock conditions, drilling schedule, and transportation requirements.
The ZD600 is also listed for geothermal-related drilling and certain engineering applications. Suitability depends on the specific borehole design, depth, temperature conditions, and technical requirements of the project.
For projects that require substantially greater drilling capacity, buyers can also compare the ZD-2000 Crawler Full-Hydraulic Water Well Drilling Rig. Its listed maximum drilling depth is 2,000 meters, but the appropriate choice should be based on the actual drilling program rather than maximum depth alone.
For international drilling contractors, selecting a supplier involves more than comparing the initial machine price. The equipment configuration, technical communication, accessory compatibility, and export arrangements should all be reviewed before placing an order.
Provide the supplier with the planned drilling depth and borehole diameter. A machine's maximum rated depth does not mean that it can achieve that depth under every diameter and geological condition.
Ask the manufacturer to confirm whether the proposed configuration matches the complete drilling program.
Share any available geological survey, formation description, or information about the expected soil and rock layers.
These details help determine whether DTH, mud, or another suitable drilling arrangement should be considered. If geological information is limited, discuss the uncertainty with the supplier before finalizing the equipment specification.
Supporting equipment must match the selected drilling method and rig requirements.
For pneumatic drilling, verify the required air pressure and flow rate as well as compatibility with the selected hammer and drill bit. For mud drilling, confirm the required pump capacity and the complete fluid-circulation arrangement.
Do not select a compressor or pump solely by comparing one specification. The complete system must be matched to the intended operation.
Ask which drill pipes, DTH hammers, drill bits, reamers, and other tools are included in the quotation.
Check connection standards, dimensions, material requirements, and compatibility with the proposed rig. If the equipment will be used across different formations, discuss the tools needed for the expected operating conditions.
Before ordering, clarify the availability of routine maintenance parts and replacement components. Request the relevant operating instructions, maintenance documentation, and parts identification information.
For overseas projects, it is also useful to establish how technical questions will be handled after delivery and how replacement parts can be ordered.
International buyers should review the machine configuration, packing list, shipping dimensions, weight, export documents, delivery terms, and expected dispatch schedule.
The final quotation should clearly identify the machine model, included accessories, optional components, warranty terms, and any agreed technical support.
ZDrill Machinery operates under Shijiazhuang Zhengdrilling Machinery Equipment Co., Ltd., based in Shijiazhuang, Hebei, China. The company's official website states that it was founded in 1997 and focuses on drilling equipment research and development, manufacturing, international sales, and technical services.
Its product portfolio includes crawler, truck-mounted, and trailer-mounted water well drilling rigs, as well as exploration drilling equipment, air compressors, mud pumps, and drilling tools.
For buyers evaluating a water well drilling rig manufacturer in China, the following points are worth discussing with the supplier:
Equipment selection: Confirm which model best matches the project's depth, diameter, geology, and operating method.
Configuration options: Clarify available accessories and any customization requirements before production.
Supporting equipment: Discuss compatible compressors, pumps, pipes, and drilling tools.
Export preparation: Confirm packing, shipping arrangements, documentation, and delivery terms.
After-sales communication: Establish the process for technical questions, routine maintenance, and spare-parts requests.
You can learn more about the company and its product range on the official ZDrill Machinery website.
Providing clear project information helps the supplier evaluate the proposed configuration and prepare a more relevant quotation.
| Information Required | Details to Provide |
|---|---|
| Project location | Country and project region |
| Application | Domestic water, irrigation, industrial water, geothermal, or other |
| Required drilling depth | Target depth in meters |
| Borehole diameter | Planned diameter or diameter range |
| Geological conditions | Soil, sand, gravel, weathered rock, hard rock, or available survey data |
| Drilling method | DTH, mud drilling, rotary drilling, or recommendation required |
| Supporting equipment | Air compressor, mud pump, drill pipes, bits, and other accessories |
| Quantity | Number of rigs required |
| Delivery requirements | Destination port or delivery location |
| Customization | Any special configuration or operating requirements |
If the project requirements are not fully defined, share the available information first. The supplier can then clarify which technical details are still needed before a final specification is confirmed.
The ZDrill product page lists a maximum drilling depth of 600–700 meters. The applicable depth depends on the confirmed machine configuration and drilling conditions, so buyers should verify the specification for their intended project.
The manufacturer lists DTH hammer drilling among the available methods and identifies both loose layers and bedrock as potential working conditions. The required hammer, bit, air supply, and operating configuration should be confirmed for the actual formation.
The product page lists an air compressor and mud pump as optional supporting equipment. Buyers should confirm which components are included in the quoted package and which must be purchased separately.
No single drilling rig is suitable for every project at a given depth. Borehole diameter, geological conditions, drilling method, equipment configuration, and site restrictions all affect suitability. Ask the manufacturer to review the complete drilling requirements before ordering.
Contact ZDrill Machinery with the required depth, borehole diameter, geological information, drilling method, destination country, and accessory requirements. This information helps the supplier assess the appropriate configuration and prepare a quotation.
The ZD600 water well drilling rig is a crawler-mounted, full-hydraulic option for contractors evaluating medium-to-deep borehole equipment. Its published specifications and available drilling methods make it worth considering for selected water well, irrigation, industrial water supply, and engineering projects.
Before purchasing, compare the rig's rated capacity with the actual drilling program and confirm the required accessories, technical support, and export arrangements.
If you are looking for a ZD600 water well drilling rig supplier in China, contact ZDrill Machinery to discuss your project requirements and request a configuration-specific quotation.
Contact: bruce@well-drillrigs.com
Website: https://www.well-drillrigs.com/
Hot Tags: ZD600 Water Well Drilling Rig, ZD600 Drilling Rig Supplier, ZD600 Water Well Drilling Rig Manufacturer, 600m Water Well Drilling Rig, Crawler Water Well Drilling Rig, Hydraulic Water Well Drilling Machine, Deep Borehole Drilling Equipment, Water Well Drilling Rig Factory China
Processing Demand Survey
x
