Shijiazhuang Zhengdrilling Machinery Equipment Co., Ltd.
Service Email: bruce@well-drillrigs.com
Bruce:+86-18603299555
EN
ES
FR
RU
Choosing the right drilling rig is an important step for contractors working on rural water supply, agricultural irrigation, and small engineering projects. The equipment needs to match the required borehole depth, drilling diameter, geological conditions, and available supporting systems.
The ZD300 water well drilling rig from ZDrill Machinery is a crawler-mounted drilling machine designed for applications such as rural drinking water wells, farm irrigation wells, and selected shallow engineering projects. According to the manufacturer's published specifications, the standard model has a maximum drilling depth of 300 meters and a drilling diameter range of 105–325 mm.
For buyers looking for a ZD300 water well drilling rig manufacturer in China, reviewing the technical parameters and confirming the complete equipment configuration are essential steps before requesting a quotation.
This guide explains the ZD300's specifications, potential applications, drilling method options, and key considerations for international buyers.
For the original specifications, visit the official ZD300 Water Well Drilling Rig product page.
The following table summarizes the parameters published on ZDrill's official product page.
| Technical Parameter | Manufacturer-Published Specification |
|---|---|
| Model | ZD300 |
| Maximum drilling depth | 300 m |
| Drilling diameter | 105–325 mm |
| Working air pressure | 1.05–3.45 MPa |
| Air consumption | 16–55 m³/min |
| Drill pipe length | 3 m or 4.5 m |
| Drill pipe diameter | 89 mm / 102 mm |
| Axial pressure | 4 T |
| Lifting force | 20 T |
| Maximum rotary torque | 6,500–8,500 N·m |
| Rotary speed | 60–100 r/min |
| Walking speed | 3.5 km/h |
| Climbing capacity | 30° |
| Machine weight | 7.5 T |
| Overall dimensions | 4.8 × 2.0 × 2.45 m |
| Engine power | 85 kW or 91 kW |
| Listed drilling methods | Top-drive hydraulic rotation and propulsion, DTH hammer drilling or mud drilling |
| Optional equipment | Mud pump, foam pump, welding generator and other supporting components |
These are manufacturer-published figures, not guaranteed field results. Actual drilling performance depends on geological conditions, borehole diameter, drilling method, tooling, and the complete machine configuration. Confirm the latest technical data sheet with the supplier before placing an order.
The ZD300 uses a crawler chassis designed to move the machine around suitable drilling sites. This configuration can be useful for contractors working on rural water wells, agricultural projects, and construction sites where equipment needs to be repositioned within the work area.
Before selecting a crawler-mounted machine, buyers should assess ground conditions, site access, transportation requirements, and the available working space.
The manufacturer's product information describes a hydraulic drilling system with adjustable rotational speed, torque, axial pressure, and related operating parameters.
These controls help operators adapt the drilling process to the selected tools and formation conditions. The actual operating settings should follow the machine manual and the manufacturer's technical guidance.
The published ZD300 specifications list DTH hammer drilling and mud drilling among the available drilling methods.
The correct method depends on the formation, borehole design, and project requirements:
DTH drilling: Often considered for suitable rock formations when the hammer, bit, and air supply are properly matched.
Mud drilling: May be suitable for selected loose or unconsolidated formations where drilling fluid is required for cuttings removal and borehole support.
Not every accessory is necessarily included in the standard package. Buyers should confirm the intended drilling method and the supporting equipment required for their project.
Rural water supply projects may require boreholes to access groundwater for households and communities. Before selecting the drilling rig, project planners should review the expected depth, geological survey, required borehole diameter, and local well-construction regulations.
The ZD300 may be considered where its rated capacity and configuration match these requirements.
Agricultural operations may use groundwater to support crop irrigation, particularly where surface water is limited or seasonal.
For farm water well drilling, contractors should consider the planned borehole depth, required water supply, formation characteristics, and drilling schedule. The final well design should also account for groundwater availability and local permitting requirements.
Some construction and engineering projects require drilling holes for specific site applications. The suitability of the ZD300 depends on the required borehole diameter, depth, drilling method, and project specifications.
Buyers should explain the intended application clearly so the supplier can confirm whether the machine is appropriate.
Remote projects may require careful planning for machine transportation, supporting equipment, drill pipes, consumables, and maintenance.
When choosing a ZD300 drilling rig supplier, buyers should consider the entire drilling package and the practical requirements of operating the machine at the intended location, not only the rig itself.
The drilling method should be selected according to the geological conditions and the planned borehole.
DTH drilling uses a pneumatic hammer near the drill bit to break rock through repeated impact. It is often considered for suitable hard-rock formations.
Before ordering a DTH configuration, confirm the required air pressure and flow, hammer model, bit diameter, drill pipe compatibility, and compressor capacity.
The compressor must be matched to the complete drilling system. Selecting it solely by engine power or a general model category may result in an unsuitable configuration.
Mud drilling uses drilling fluid to help transport cuttings out of the borehole. Depending on the formation and drilling program, the fluid may also help support the borehole walls.
Buyers should discuss the required mud pump, flow rate, pressure, fluid-circulation arrangement, and other supporting components with the supplier.
The ZD300 product page lists both DTH and mud drilling options. However, the availability of a particular method depends on the final configuration and required accessories.
When requesting a quotation, state whether the project requires pneumatic drilling, mud drilling, or a combined arrangement. Ask the manufacturer to identify exactly which components are included and which are optional.
The appropriate model depends on the target depth, borehole diameter, geological conditions, and project requirements.
For buyers comparing drilling equipment, the following models provide different rated capacities.
| Model | Published Maximum Drilling Depth | Potential Selection Consideration |
|---|---|---|
| ZD200A | 80 m | Selected shallow water well projects |
| ZD300 | 300 m | Projects requiring a rated depth of up to 300 m |
| ZD400 | Confirm with manufacturer | Compare its current specifications with the project requirements |
| ZD600 | 600 m | Projects requiring greater rated depth |
The ZD200A and ZD600 product pages provide model-specific information on the official website. Buyers should request the latest ZD400 specifications before making a direct technical comparison.
You can review the ZD200A Water Well Drilling Rig and ZD600 Water Well Drilling Rig for additional reference.
Important: A higher maximum drilling depth does not automatically make a machine the best choice. Compare the rated depth at the intended borehole diameter, drilling method, tooling, transportation needs, and overall project budget.
Provide the supplier with the target depth and planned borehole diameter. Ask the manufacturer to confirm that the proposed configuration is suitable for both requirements.
The maximum rated depth should not be interpreted as a guarantee that the rig can reach that depth under every formation and diameter.
Share available geological survey results or describe the expected soil and rock layers.
This information helps determine whether DTH, mud drilling, or another suitable arrangement should be considered. If the geological conditions are uncertain, tell the supplier before finalizing the specification.
Ask whether the quotation includes the following items:
Main drilling rig
Drill pipes and connecting components
DTH hammer and bits, if required
Air compressor, if required
Mud pump, if required
Other drilling tools and optional accessories
Confirm the specifications and compatibility of each component. This makes it easier to compare quotations from different suppliers on an equivalent basis.
The ZD300's published weight and dimensions should be considered when planning transportation and unloading.
Confirm the machine's shipping dimensions, packing method, lifting requirements, delivery terms, and the accessibility of the final jobsite before arranging shipment.
Before ordering, discuss the availability of replacement parts, operating manuals, maintenance instructions, warranty conditions, and technical assistance.
For overseas projects, it is useful to establish how to identify parts, submit technical questions, and order replacements after the machine has been delivered.
ZDrill Machinery operates under Shijiazhuang Zhengdrilling Machinery Equipment Co., Ltd., based in Shijiazhuang, Hebei, China. The company's official website describes its business as drilling equipment research and development, manufacturing, international export, and technical services.
Its product portfolio includes crawler, truck-mounted, and trailer-mounted water well drilling rigs, along with air compressors, mud pumps, and drilling tools.
For buyers evaluating a water well drilling rig manufacturer in China, the following points are worth confirming during the purchasing process:
Product selection: Whether the model matches the required depth, diameter, and drilling method.
Configuration support: Whether the supplier can specify compatible drilling tools and supporting equipment.
Technical documentation: Whether the final quotation is accompanied by the correct specifications and accessory list.
Export arrangements: Whether packing, shipping documentation, and delivery terms are clearly stated.
After-sales support: Whether operating guidance, maintenance information, and spare-parts assistance are available.
Learn more about the company through the official ZDrill Machinery website and its customer support and after-sales service page.
A detailed inquiry helps the supplier understand the project and recommend a suitable configuration.
| Information | What to Provide |
|---|---|
| Project location | Country and region |
| Application | Rural water supply, irrigation, or engineering |
| Required drilling depth | Target depth in meters |
| Borehole diameter | Planned diameter or diameter range |
| Geological conditions | Soil, sand, gravel, weathered rock, or hard rock |
| Drilling method | DTH, mud drilling, or recommendation required |
| Supporting equipment | Compressor, mud pump, drill pipes, bits, and accessories |
| Quantity | Number of rigs required |
| Site conditions | Access, terrain, and available working space |
| Delivery requirements | Destination port or delivery location |
If some details are not available yet, share the information you have and explain which requirements still need assessment. The supplier can then clarify what is necessary before confirming the configuration.
The official product page lists a maximum drilling depth of 300 meters. Actual achievable depth depends on geological conditions, borehole diameter, drilling method, tooling, and the selected configuration.
The manufacturer lists a drilling diameter range of 105–325 mm. Confirm the applicable tooling and configuration for the diameter required by your project.
Yes. The manufacturer lists farm irrigation wells among the model's intended applications. Suitability should be confirmed against the planned well depth, diameter, geological conditions, and required water supply.
The product page identifies a mud pump, foam pump, welding generator, and other equipment as optional supporting components. Buyers should confirm the standard package and any additional equipment required for the selected drilling method.
The choice depends on the formation, borehole design, and drilling program. DTH drilling is often considered for suitable rock formations, while mud drilling may be appropriate for selected loose formations. Ask the supplier to review the geological information before deciding.
Contact ZDrill Machinery with the required depth, borehole diameter, geological information, drilling method, destination country, and accessory requirements. These details help the supplier prepare a more relevant equipment proposal.
The ZD300 water well drilling rig is a crawler-mounted drilling machine listed for rural drinking water wells, farm irrigation wells, and selected shallow engineering projects. With a published maximum drilling depth of 300 meters and a drilling diameter range of 105–325 mm, it can be considered for projects that fit its rated capacity and available configuration.
Before placing an order, confirm the technical specifications, drilling method, supporting equipment, and delivery arrangements with the manufacturer.
If you are looking for a ZD300 water well drilling rig manufacturer in China, contact ZDrill Machinery to discuss your project and request a configuration-specific quotation.
Contact Email: bruce@well-drillrigs.com
Official Website: https://www.well-drillrigs.com/
Hot Tags: ZD300 Water Well Drilling Rig, ZD300 Water Well Drilling Rig Manufacturer, ZD300 Drilling Rig Supplier, 300m Water Well Drilling Rig, Crawler Water Well Drilling Machine, Pneumatic Water Well Drilling Rig, DTH Water Well Drilling Rig, Farm Water Well Drilling Equipment, Water Well Drilling Rig Factory China
Processing Demand Survey
x
